Konica Minolta bizhub PRESS C7000P - Manual (Page 10)

IC-601 2-2
2.1 Job Centro 2
2 Overview of the Job Centro
This chapter describes the overview and connection environment of "Job Centro" that is an utility accompa-
nies the image controller to provide printing function to the main body.
2.1 Job Centro
Job Centro is the application to manage the printing job in the printing system that is composed with the main
body and the image controller. For details of the image controller, refer to "IC-601 User's Guide Printer".
2.1.1 Roles of Job Centro
Job Centro has two chief functions.
One of the chief functions is to acquire the device status such as the printer status, the consumables, and
the tray information. From this information, you can confirm the status of the main body easily on your com-
puter
The other one is to display and manage jobs. Through [JOB LIST] of Job Centro, you can monitor the sending
job of the printer driver and operate the printing job. This function has the important role in the workflow of
the main body. Because this function can manage the printing job being in the image controller which can
not be managed from the control panel.
The monitoring range of Job Centro is so wide that you can monitor from receiving of job data in the image
controller to outputting of job and also you can check both of the printing queue and HDD. Using Job Centro,
you can also operate these jobs being within the range mentioned above. In addition to that, you can invoke
the job edit utility and the page edit utility from Job Centro to edit job being in the image controller.
Before transmitting job to the main body, you can operate job and edit job and page without slowing down
the engine speed of the main body by using Job Centro.
For detailed information on the available operations of job, refer to page 6-2
Job Centro
Image Controller Main Body
JOB
Hold/
HDD
Hold
Rippping Printing Output
Rip
Waiting