2 interfaces used for connection, Connection diagram – Konica Minolta bizhub PRESS C7000P User Manual

Page 15

Advertising
background image

IC-601

2-7

2.3

Operating environment

2

2.3.2

Interfaces used for connection

To connect Job Centro to the image controller, use the Ethernet via a network connection.

It supports 1000Base-T, 100Base-TX, and 10Base-T standards.

Connection diagram

The network cable is connected to the network port of the image controller

Lateral side of the image controller

1. Ethernet port (1000Base-T/100Base-TX/10Base-T)

1

Advertising
This manual is related to the following products: