Konica Minolta bizhub PRESS C7000P - Manual (Page 25)

IC-601 5-2
5.1 Launch Job Centro 5
5 Basic Information
This chapter describes launch procedure, exit procedure, and screens of Job Centro.
5.1 Launch Job Centro
This section describes how to launch Job Centro.
To use Job Centro, it is necessary to connect to the image controller. You can not launch Job Centro without
connecting to the image controllers.
By connecting to the image controller, Job Centro can acquire the information of the main body. You can
switch the connection when there are two or more image controllers.
In this section, "Login" and "User Authentication/Account Track" are explained separately. "Login" is neces-
sary operation for all users. "User Authentication/Account Track" is necessary operation when the user au-
thentication or account track function is set in the main body.
5.1.1 General Login
To launch Job Centro, login procedure is necessary first.
0 To login, the IP address and the port number of the image controller are necessary. When the port
number is unknown, confirm the JSP settings of the image controller. (default: 30081)
0 Confirm that the image controller can communicate.
0 Job Centro is the Java Application. When the Java application is blocked by the firewall, [Windows Se-
curity Alert] screen is displayed. In this case, select the option corresponding to your network environ-
ment, and click [Allow access] to allow the communication by Java application on your network.
1
Select [Start] ->[All Programs] ->[KONICA MINOLTA] ->[Job Centro] ->[KONICA MINOLTA Job Centro].
% Or double-click the short cut icon on the Desktop screen.
[Select] screen appears.
2
Enter the IP address (within 255 alpha-numerical characters) of the image controller to which you want
to connect Job Centro into [IP Address] of [Select] screen, select port number from [Port Number] and
click [Connection].
% You can select the IP address and the port number with which connections were established before,
from [IP Address] and [Port Number]. The combination of the connected IP address and port
number is retained even after exiting the Job Centro.
% When you have connected to the image controller already, the IP address and the port number of
the image controller you connected are displayed on [Current Destination].
% When you click [Cancel], the login process is canceled and you can't start Job Centro.
% When you click [Help], the [Help] screen appears.
Job Centro launches and [Job Centro] screen appears.