Store job into the hold queue of the main body, 3 copy/delete job in/from the image controller, Copy job – Konica Minolta bizhub PRESS C7000P User Manual
Page 53: Store job into the hold queue of the main body -15
IC-601
6-15
6.3
Job Operation in the Image Controller (Image Controller Hold)
6
Store Job into the Hold Queue of the Main Body
This section describes how to store the job in the hold queue in the image controller into the hold queue of
the main body using [Output] function.
1
Click [Image Controller Hold] tab of the Job Centro Screen.
[Image Controller Hold] screen appears.
2
Select the job to store from the list.
The selected job is highlighted.
% You can not store when you select multiple jobs.
% When the job to operate is not displayed in the list, display it by executing search or clearing the
search conditions.
3
Click [Output].
[Output] screen appears.
% You can also operate by using [Output] from the right click menu.
% You can also operate by using [Job Operations] menu - [Output].
4
From [Output Method], select [Main Body Hold].
5
To delete the stored job from the hold queue in the image controller, check [With Job Delete].
6
Click [OK].
The job is stored to the hold queue of the main body.
6.3.3
Copy/Delete Job in/from the Image Controller
This section describes how to copy/delete the job in/from the hold queue in the image controller.
The following functions are used to copy/delete the job.
Copy Job
This section describes how to copy the job in the hold queue in the image controller using [Copy] function.
The destination of the copy is the hold queue in the image controller.
The file name of the copied job is same with that of the original job. You can not specify the file name.
1
Click [Image Controller Hold] tab of the Job Centro Screen.
[Image Controller Hold] screen appears.
2
Select the job to copy from the list.
The selected job is highlighted.
% You can not copy when you select multiple jobs.
% When the job to operate is not displayed in the list, display it by executing search or clearing the
search conditions.
3
Click [Copy].
The job is copied and displayed on [Image Controller Hold] screen.
% You can also operate by using [Copy] from the right click menu.
% You can also operate by using [Job Operations] menu - [Copy].
Function
Description
[Copy] function
This function copies the job to the hold queue in the image controller.
[Delete] function
This function deletes the job from the hold queue in the image controller.