Konica Minolta bizhub PRESS C7000P - Manual (Page 55)

IC-601 6-17
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
% When you switch the screen to other than [Image Controller Hold], the state of job returns to the
state before unlocked.
6.3.5 Operate Job File
This section describes how to operate the job file in the hold queue in the image controller.
The following functions are used to operate the job file.
Rename File Name
This section describes how to rename the file name of the job in the hold queue in the image controller using
[Rename File Name] function.
1
Click [Image Controller Hold] tab of the Job Centro Screen.
[Image Controller Hold] screen appears.
2
Select the job to change the file name from the list.
The selected job is highlighted.
% When the job to operate is not displayed in the list, display it by executing search or clearing the
search conditions.
3
Click [Rename].
[Rename] screen appears.
% You can not use [Rename] when you select multiple jobs.
% You can also operate by using [Rename] from the right click menu.
4
Specify the new file name in [File Name-After].
% Specify it in [File Name-After] within 40 one-byte alpha-numerical characters.
% You can also specify the same file name as that of the existed job.
5
Click [OK].
The file name is changed.
Function Description
[Rename File Name]
function This function changes the file name of the job.
[Import] function This function imports the file on the computer to the hold queue in the image
controller.
[Backup] function This function saves the job in the hold queue in the image controller as file (icj
file).
[Restore] function This function restores the job backuped to the hold queue in the image con-
troller.