Crop mark] screen, Crop mark] screen -32 – Konica Minolta bizhub PRESS C7000P User Manual
Page 70
Advertising
IC-601
6-32
6.3
Job Operation in the Image Controller (Image Controller Hold)
6
[Crop Mark] screen
Function
Description
[Print Crop Mark]
You can specify whether to print the crop mark or not.
[Crop Mark]
You can specify the type of the crop mark (Type 1/2/3).
[Cut Length]
You can specify the cut length.
[Print Position Setting]
You can specify the position to print the crop mark (Corner, Center,
or Corner/Center).
[Offset]
You can specify the horizontal shift/vertical shift.
[Only on Front Side]
Check this to print the crop mark only on the front side in 2-sided
printing.
[Setting for Imposition]
You can specify whether to print the crop mark per page or per
sheet.
Preview image
Displays the preview image of the settings of crop mark and impo-
sition.
Advertising
This manual is related to the following products: