Delete page, Rotate page, Insert blank page – Konica Minolta bizhub PRESS C7000P User Manual
Page 77
IC-601
6-39
6.3
Job Operation in the Image Controller (Image Controller Hold)
6
Reference
You can also operate by dragging & dropping the copying page of [Reference] screen between destination
pages of [Edit Page] utility
-
The shape of the mouse cursor becomes a cross when you drag the page.
-
When you move the cross shape cursor to the destination point, the pop-up string of [Insert] appears.
Delete Page
This section describes how to delete the page within the job.
1
Select the page that you want to delete and select [Delete] from the right click menu.
The selected page is highlighted.
% You can select and delete the multiple pages.
% You can also operate by clicking [Page Operations] - [Delete] button.
Rotate Page
This section describes how to rotate the page within the job.
1
Select the page that you want to rotate by 180 degrees and select [Rotate] from the right click menu.
The selected page is highlighted.
% You can select and rotate the multiple pages.
% You can also operate by clicking [Page Operations] - [Rotate] button.
Insert Blank Page
This section describes how to insert the blank page.
1
Right click [Insert Paper/Index] - [Blank Page] icon and select [Copy].
[Insert Sheet Setting] screen appears.
2
Specify the following settings in [Insert Sheet Setting] screen and click [OK].
Item
Description
[Use Paper Profile]
When you use the paper profile, check this check box and select
the paper from [Paper Profile] list.
[Paper Size]
Select the paper size.
To use Custom Size, register the paper size in [Custom Size Set-
tings] and select the registered paper size from the [Paper Size]
list. Refer to page 6-27 for more detailed information on how to
register the paper size.
[Feed Direction]
Select the feed direction.
[Paper Tray]
Select the paper tray.
[Insertions]
Specify the number of insertions. This is available only if PI Tray
is selected for Paper Tray.