Konica Minolta SL1000 - Manual (Page 113)

Chapter 4 Operation
4-21
When the 16 mm/35 mm Roll Film (Open-Reel) is used.
1 Insert the Axis of the Attachment B into the hole of the Drive Shaft.
2 Insert 2 Pins of the Attachment B in the Notches of the Drive Shaft.
NOTE ! The position of Pins is adjusted so that Attachment Pins may surely connect it
with Notches.
NOTE ! The Drive Shaft and the Attachment B are attracted and held together by a
magnet. When the Attachment B is removed, the head of the Attachment B is no
longer attracted by the magnet, and it detaches.
Attachment B
Axis
Drive Shaft
Attachment B
Drive Shaft
Notch
Notch
Pin
Pin