Konica Minolta SL1000 - Manual (Page 33)

Chapter 3 SL-Touch for SL1000
3-7
9 The language selection screen will be displayed, then, select the language and click the
“OK” button.
NOTE ! The selected language can be changed in the “Preferences”.
10 When the “InstallShield Wizard Complete” screen appears, click the “Finish” button and
remove the CD-ROM from the Personal Computer.
IMPORTANT ! Execute the installation of the device driver when the installation of
SL-Touch for SL1000 application is completed.
If the installation of the device driver is not completed, the application
cannot be started.
Install the device driver according to the following procedures.
11 Connect the Scanner to the Personal Computer with the USB cable.
12 Turn the Power Switch of the Scanner ON.