Konica Minolta SL1000 User Manual
Page 36
SL1000 User’s Guide
3-10
6
When the “Windows Security” screen appears, click “Install” button.
7
When the “Update Complete” screen appears, click the “Finish” button, and remove the
CD-ROM from the Personal Computer.
IMPORTANT ! When the SL-Touch for SL1000 application is updated, the device driver is
deleted once. Therefore, please install the device driver again.
If the installation is not completed, the application cannot be started.Install
the device driver according to the following procedures.
8
Connect the Scanner to the Personal Computer with the USB cable.
9
Turn the Power Switch of the Scanner ON.
10
When the scanner is detected, and the installation of the device driver is completed, the
installation of the Application completes.
NOTE !
Please refer to 13 of the "1.3 Installation the Application Software and the Driver"
for details.