Konica Minolta SL1000 User Manual
Page 53
Advertising
Chapter 3 SL-Touch for SL1000
3-27
4. Contrast
The contrast of the image is adjusted.
High
The contrast of the image is increased.
Low
The contrast of the image is decreased.
NOTE !
The proper image density can be obtained by adjusting
"Brightness" and "Contrast" to distribute the histogram in the
whole area.
5. Sharpness
The sharpness of the image is adjusted.
Sharp
The image is made sharper.
Soft
The image is made softer.
NOTE !
Even if "Brightness" and "Contrast" are adjusted according to the film, an
appropriate image density might not be obtained. In that case, it might be
improved by changing illuminance intensity of the LED lamp. (Please refer to the
section "3.4 Lamp Illuminance".)
Advertising