Konica Minolta SL1000 User Manual
Page 57
Chapter 3 SL-Touch for SL1000
3-31
4. Save
The input batch is preserved.
When "Save" is clicked after "Batch title" is input, the batch is preserved.
The following setting is preserved in the batch.
Orientation, Size, Resolution, Image Type, Edit, Save in, File name,
File number, Format, Compression, Printer Name,
Fit to printable area of paper size, Rotate to orientation of paper
NOTE !
It can not be preserved by changing the setting of
"Default".
Batch of each logon user of Windows is preserved.
5. Rename
The Batch Name can be changed.
6. Orientation
When the fixed form size is output, the output direction is set.
Portrait:
Scan image is output by a portrait fixed form
size.
Landscape:
Scan image is output by a landscape fixed
form size
7. Size
The output image size is set.
It can be selected according to 12 selections (A2, A3, A4, B3, B4, B5, 17”
x 22”, Ledger, Legal, Letter, Check and Custom).
NOTE !
For “Image Type” you can only select “Grayscale" or
“B/W" for A2, B3, and 17"X22" documents.
When the fixed form size (excluding Custom) is selected,
the range of the Cropping Area is output to the selected
output size or less.
When Custom is selected, it is output in the condition
within the range of the Cropping Area that has been
selected.
8. Resolution
The output resolution when saving a file is set.
It can be selected according to 9 selections ( 600, 400, 360, 300, 240, 200,
150, 100 ,75dpi.)
NOTE !
As for "600 dpi", if the "Image type" is "Gray scale" or
"Monochrome binary", and "Size" is less than “A4" or
“Letter", only it can be selected ".
The resolution when the printer output is fixed by
"360dpi".