Konica Minolta SL1000 - Manual (Page 95)

Chapter 4 Operation
4-3
2 Turning the Scanner ON/OFF
2.1 Turning ON the Power Switch
1 Check that the Scanner is securely connected to the Personal Computer with the USB Cable,
and press the Power Switch of the Scanner to the ON (“I” Position).
NOTE ! When the USB Cable that connects this machine with the computer is not
securely connected, scanner image data cannot be read.
2.2 Turning OFF the Power Switch
1 Quit the application (SL-Touch for SL1000).
2 Press the Power Switch to the OFF (“O” Position).
NOTE ! Do not turn OFF the Power Switch when the application is starting in the
Scanning Mode.
Power Switch
Power Switch