Konica Minolta SL1000 - Manual (Page 108)

SL1000 User’s Guide
4-16
4.6 Operation of the A-Type Cartridge Adaptor (Option)
NOTE ! A-Type Cartridge Adapter can be used for both Motorized Roll Film Carrier and
Manual Roll Film Carrier.
When the 16 mm Cartridge Film (type: ANSI) is used.
1 Mount the 16mm Film Cartridge (type: ANSI) onto the Reel Shaft in the figure below and
unwind the Leading Edge of the Film.
NOTE ! ・ Be sure to set the film cartridge so that its winding direction is to be clockwise.
・ Push the cartridge into a bottom of the Reel Shaft when the cartridge is inserted.
2 Insert the film between the upper and lower fiche glass.
NOTE ! Set the film as shown in the figure below.
CAUTION
・ Do not set it in a counterclockwise rolling so that the film surface might get the wound.
3 Insert the Leading Edge of the Film into the slit in the take-up reel and rotate the take-up
reel two to three turns so that the Film Leader is wound around the take-up reel.
4 Operate the Fiche Carrier, and rewind the film to an image lead position.