Konica Minolta SL1000 User Manual
Page 110
SL1000 User’s Guide
4-18
4.7 Operation of the M-Type Cartridge Adaptor (Option)
NOTE! M-Type Cartridge Adapter can be used only for the Motorized Roll Film Carrier
installation machine.
When the M-Type Cartridge Film is used.
1
Insert the Axis of the Attachment A into the hole of the Drive Shaft.
2
Insert the 2 Pins of the Attachment A in the Notches of the Drive Shaft.
NOTE !
The position of Pins is adjusted so that Attachment Pins may surely connect it
with notches.
NOTE !
The Drive Shaft and the Attachment A are attracted and held together by a
magnet. When the Attachment A is removed, the head of the Attachment A is no
longer attracted by the magnet, and it detaches.
Attachment A
Axis
Drive Shaft
Drive Shaft
Notch
Notch
Pin
Pin
Attachment A