Konica Minolta Magicolor 6100 Series - Manual (Page 25)

Configuring a Port 23
7
Configure the events to log.
The following types of messages can be reported in the Application Event Log. See
your Microsoft Windows 2000/NT4 documentation for details on this log.
a Errors
Enables error message reporting in the Application Event Log. Click the Errors
check box to enable error message reporting. A clear check box disables error
message reporting in the log.
b Warnings
Enables warning message reporting in the Application Event Log. Click the Warn-
ings check box to enable warning message reporting. A clear check box disables
warning message reporting in the log.
c Information
Enables information message reporting in the Application Event Log. Click the
Information check box to enable information message reporting. A clear check
box disables error message reporting in the log.
8
Configure the audible alert.
This setting enables the Network Print Monitor’s problem alert sound. Click the
Audible Alert check box to have the monitor beep the system speaker when it
encounters an error writing to the port. A clear check box disables the problem alert
sound.
9
Choose OK.
10
Close the Print Servers Properties dialog box.
Workstation 2000/NT4 Print Spooler dialog box displays
asking for a retry or cancel response.


Regardless of your response,
the job is terminated and
cleared from the system.