Konica Minolta Magicolor 6100 Series - Manual (Page 29)

Uninstalling the Crown Print Monitor 27
Uninstalling the Crown Print Monitor
Use this procedure when uninstalling the Crown Print Monitor.
1
From the Start menu, choose Settings.
2
From the Settings menu, choose Control Panel.
3
In the Control Panel dialog box, choose Add/Remove Programs.
4
On the Install/Uninstall tab select Print Monitor.
5
Choose Add/Remove.
6
In the Welcome window, choose OK.
7
If a DeleteMonitor window appears, then the Crown Print Monitor is in use and can-
not be deleted until it is no longer in use. Continue with Step 8.
Otherwise, you have successfully uninstalled the Crown Print Monitor.
8
Go to the Start menu and choose Settings.
9
From the Settings menu, choose Printers.
10
In the Printers dialog box, double-click on the printer that has the Crown Print Mon-
itor installed.
11
In the Crown Print Monitor window, from the Printer menu choose Properties.
12
In the Properties window, choose the Details tab, scroll down in the Print to the fol-
lowing port: listing and select a port not associated with the Crown Print Monitor.
13
Choose Apply and then choose OK.
14
Repeat steps 1 through 6 to complete the uninstallation of the Crown Print Monitor.


All files that are associated with the Crown Print Monitor installation and all ports
which were associated with the Crown Print Monitor are removed.