Konica Minolta Magicolor 6100 Series - Manual (Page 36)

Printer Status Information 34
Printer Status Information
This printer-dependent status information displays via Print Manager in the printer status
window when the Crown Print Monitor is displaying a message from the print device.
Most of these messages are uppercase and somewhat cryptic, and they may vary from one
print device to the next. See your printer documentation for a complete list and description
of these messages.
This message displays in
the Print Manager printer
status window... It indicates... Take these actions...
Print device control panel
status messages, such as
the following:
IDLE
TONER OUT
ADJUST UPPER BIN
PAPER JAM
The print device has encoun-
tered a problem (the status
message is also displayed on
the control panel of the print
device). See your printer docu-
mentation for a complete list of
these messages.

If the print job is spooled on
a local workstation, a dialog
box prompting you to either
delete or retry the job
displays.

If the print job is spooled on
a remote workstation, the
job is retried until it is either
deleted or the printer
becomes unavailable (for
example, is busy printing
another job or goes off-line).


Remember that if
the send request
timeout expires,
then the print job
will be terminated
and cleared from
the system.
Fix the printer problem and then do
the following:

For print jobs spooled on a local
workstation, click the appropriate
dialog box button.

For print jobs spooled on a remote
workstation, either wait until the
error clears or delete the job.