Konica Minolta Magicolor 6100 Series - Manual (Page 26)

Using the Crown Print Monitor 24
Using the Crown Print Monitor
Before you can use the Crown Print Monitor, you must have completed the following
steps:
 Installed the Crown Print Monitor
 Added a port for the print device
 Configured the port settings, if necessary
Windows Me/98/95
Print Job Status Information
To obtain status information on a print job, from the Start menu choose Settings and then
Printers, then double-click on the printer you have selected. Whenever a print job is sent to
that port, its status is reported in the sample status window shown below.
The following is an explanation of the status window menus and field names:
Prompt Explanation
Printer Clicking on Printers provides a drop-down menu that allows you to select
Pause Printing, Purge Print Jobs, Set as Default or Printers Properties.
Document Gives you the option of Pausing or Cancelling an existing print job.
View Allows you to view the status bar.