Konica Minolta Magicolor 6100 Series - Manual (Page 16)

Adding a Printer Port 14
13
Highlight Spooler in the Services dialog box, choose the Stop button (located on the
right-side of the dialog box), and the following message displays:
Are You Sure You Want To Stop Spooler Service?
14
Choose Yes, the Spooler status is set to blank, and the following message displays:
Attempting to stop the spooler service on username
15
Choose the Start button, Spooler status is set to Started, and the following message
displays:
Attempting to start the spooler service on username
16
In the Services dialog box choose the Close button.
17
Close the Control Panel.
The Crown Print Monitor is now upgraded for all queues using it.
18
Add the Port as explained in the next section, “Adding a Printer Port.”
Adding a Printer Port
Before you can transport print jobs to a print device and receive status information on
them using the Crown Print Monitor, you must add the port associated with the print
device to your system configuration.
Windows Me/98/95
Manual Option
1
From the Start menu, choose Settings.
2
From the Settings menu, choose Printers.
3
In the Printers window, click the right mouse button on an existing printer to display
the printer’s menu.
4
Choose Properties to display the Properties dialog box.
5
Choose the Details tab and then choose Add Port.
6
Select Other.