3 logging on to a multifunctional product, Logging on to a multifunctional product – Konica Minolta bizhub C451 User Manual

Page 24

Advertising
background image

Using Authentication Unit (Biometric Type) AU-101

3

AU-101

23

2

Note

When the multifunctional product is turned off, then on again with the
main power switch, wait at least 10 seconds to turn the machine on after
turning it off. The machine may not operate correctly if it is turned on
immediately after being turned off.

Hold the plug when plugging and unplugging the USB cable, otherwise
the cable may be damaged.

3.3

Logging on to a multifunctional product

Follow the procedures described below to log on to multifunctional products
by completing authentication with finger vein patterns.

When “1-to-many authentication” has been specified

%

Position the registered finger on this device.

The user is authenticated, and the Basic screen appears.

Advertising
This manual is related to the following products: