Konica Minolta bizhub 500 - Manual (Page 176)

Specifying Settings From the Control Panel 3
bizhub 500/420 3-51
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
IP Filtering
The IP addresses in the specified ranges can be permitted or denied.
IP addresses can connect depending on whether “Enable” or “Disable” has
been selected for “Permit Access” and “Deny Access” in the IP Filtering
screen, as shown below.
1
In TCP/IP Setting screen 5/5, touch [IP Filtering].
The IP Filtering > Permit Access screen appears.
2
Touch [Enable] or [Disable] under “Permit Access”.
Setting IP Address Connection Access
Permit Access
Disable
Deny Access
Disable All IP addresses Connection possible
Permit Access
Enable
Deny Access
Disable IP addresses in the specified range Connection possible
IP addresses out of the specified range Connection not possible
Permit Access
Disable
Deny Access
Enable IP addresses in the specified range Connection not possible
IP addresses out of the specified range Connection possible
Permit Access
Enable
Deny Access
Enable IP address in the range allowed access and out
of the range denied access Connection possible
IP address in the range allowed access and in
the range denied access Connection not possible
IP address out of the range allowed access and
out of the range denied access Connection not possible
IP address out of the range allowed access and
in the range denied access Connection not possible