Konica Minolta bizhub 500 - Manual (Page 88)

Scanning Documents 2
bizhub 500/420 2-53
Scan
nin
g
Do
cu
men
ts
Chapter 2
To enlarge/reduce the scan to a preset zoom ratio (Zoom setting)
The scan can be enlarged or reduced to a preset zoom ratio, such as one of
the standard sizes.
1
Touch [Scan Settings] in the Scan mode screen.
2
Touch [Zoom].
3
Select the zoom ratio.
– Touch the zoom ratio button for the desired standard enlargement
or reduction size.
– To scan the image reduced slightly from the actual size, touch [Min-
imal]. The zoom ratio for the “Minimal” setting can be changed from
the Zoom screen. For details, refer to “To specify the zoom ratio for
scanning (Zoom setting)” on page 2-55.
– To select a stored zoom ratio, touch a Set Zoom button.