Konica Minolta bizhub 500 User Manual

Page 303

Advertising
background image

4

Specifying Settings Using PageScope Web Connection

4-32

bizhub 500/420

Spe

c

if

ying

Set

ti

ng

s Usin

g Pag

e

Scope

We

b Co

nne

ctio

n

Chapter 4

When “Group: Scan” is selected

Item

Description

No.

Enter the registration number.

Name

Enter the registration name (up to 24 characters).

Group

Click

, and then select a group destination from the list to

display the group number.

Resolution

Select the resolution.

File Type

Select the file format.

Scan Setting

Select the unit of the data to be saved.

Subject

Specify the subject (Not Specified, 1 to 10). When “Not Spec-
ified” was selected, the default title is used. Click

to

check

the contents.

Text

Specify the text (Not Specified, 1 to 10). When “Not Specified”
was selected, the default text is used. Click

to check the

contents.

Simplex/Duplex

Select “1-Sided”, “2-Sided”, or “Cover + 2-Sided”.

Original Type

Select the quality of the original such as text or photo.

Separate Scan

Select “ON” or “OFF”.

Density

Adjust the density.

Zoom

Select the enlargement or reduction ratio for scanning. Select
a preset zoom ratio or specify separate ratios for the X and Y
directions.

Scan Size

Select the original size (“Auto”, “Standard Size”, “Custom
Size”).
For “Custom Size”, specify the horizontal and vertical
scanning sizes.

E-Mail Notification

The upload destination of the file can be notified to the spec-
ified address.

Destination

Click

to select the notification addresses.

File Name

Enter the file name (up to 30 characters).

Original Direction

Select the orientation of the original document.

Bind

Select the original binding position.

Special Original

Select whether the document contains mixed page sizes or is
Z-folded.

Book Scanning

Select whether or not to enable book scanning. If “ON” is
selected, the scanning method and binding position are
specified.

Booklet Pagination

Select whether or not to enable page scanning. If “ON” is
selected, the binding position is specified.

Erase

Specify the width of the perimeter of the document to be
erased.

Center Erase

Specify the width of the area along the binding that is to be
erased.

Advertising
This manual is related to the following products: