Konica Minolta bizhub 500 User Manual

Page 374

Advertising
background image

Specifying Settings Using PageScope Web Connection

4

bizhub 500/420

4-103

Spe

c

if

ying

Set

ti

ng

s Usin

g Pag

e

Scope

We

b Co

nne

ctio

n

Chapter 4

!

Detail

If running an antivirus program on the e-mail server, the binary division
function may not be able to be used. For details, ask the network admin-
istrator.

To receive binary e-mails, an e-mail client that supports receiving sepa-
rated e-mail is required. Note that even if separated e-mail is received it
may not be combined depending on the e-mail client being used.

2

Note

If selecting [Please check to enter host name], check that the DNS set-
tings are specified correctly before making the selection. For details, refer
to “TCP/IP” on page 4-80.

!

Detail

To perform user authentication with POP Before SMTP, the settings that
will allow POP to access the e-mail server must be specified. For details,
refer to “E-Mail RX (POP)” on page 4-100.

Max Mail Size

Specify whether to limit the size of e-mail transmissions.

Server Capacity

Enter the SMTP server capacity when mail size restriction is
enabled (input range: 1 to 100 MB).

Admin. E-Mail Address

Enter the From address for scanner transmissions and the
From address when user authentication is disabled (up to 320
characters).

POP Before SMTP

Specify whether to use POP Before SMTP.

POP Before SMTP Time

Enter the POP Before SMTP time (input range: 0-60 seconds).

SMTP Authentication

Select whether to use SMTP server authentication.

User ID

Enter the user ID when performing SMTP server authentica-
tion (up to 63 characters).

Password

Enter the password for SMTP server authentication (up to 15
characters).

Domain Name

Enter the SMTP server domain name.

Binary Division

Specify whether to send large volume of e-mail in small sizes
and separated. Use to send data that has exceeded the
maximum capacity when the maximum capacity is limited per
e-mail on the e-mail server.

Divided Mail Size

Enter the division size for binary files (input range: 100 to
15000 KB).

Item

Description

Advertising
This manual is related to the following products: