Konica Minolta bizhub 500 - Manual (Page 25)

1 Before Using the Scan Functions
1-2 bizhub 500/420
Be
fo
re
Using
t
h
e
Scan
F
unct
ion
s
Chapter 1
1 Before Using the Scan Functions
1.1 Environment Required for Using the Scan Functions
The following conditions are required to use the network and scanning func-
tions of this machine.
-
The machine is connected to the network. (required)
The functions can be used over a TCP/IP network. For details on the con-
nection, refer to “Connecting to the Network” on page 1-10. Also, net-
work parameters such as the IP address of this machine must be
specified in order to use the machine on the network. For details, refer to
“Settings for Using Network/Scanning Functions” on page 1-7.