Konica Minolta bizhub 500 User Manual
Page 65
Advertising
2
Scanning Documents
2-30
bizhub 500/420
Scan
nin
g
Do
cu
men
ts
Chapter 2
8
After specifying the settings, touch [OK].
9
Load the document into the ADF or position it on the original glass of
the machine.
10
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
Advertising
This manual is related to the following products: