Konica Minolta bizhub 200 - Manual (Page 34)

Administrator Operations 2
200/250/350 2-17
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
5
Touch [Current Code]
and type the currently
set 8-digit Administrator
Code (Administrator
Password) from the key-
pad.
– Press the [C] key to
clear all characters.
– Touch [Cancel] to go
back to the screen
shown in step 4.
6
Touch [New Code] and
type the new 8-digit Ad-
ministrator Code (Ad-
ministrator Password)
from the keypad.
– Press the [C] key to
clear all characters.
– Touch [Cancel] to go
back to the screen
shown in step 4.
? What precautions
should be used when entering the new Administrator Code (Admin-
istrator Password)?
% Be sure to enter an Administrator Code (Administrator Password)
that meets the requirements of the Password Rules for the new Ad-
ministrator Code (Administrator Password). For details of Password
Rules, see “Password Rules” on page 1-11.
7
Touch [Retype New
Code] and type the new
8-digit Administrator
Code (Administrator
Password) a second
time to prevent entry of a
wrong code.
– Press the [C] key to
clear all characters.
– Touch [Cancel] to go
back to the screen
shown in step 4.
350_security_E.book 17 ページ ２００６年１１月２０日 月曜日 午前１０時４１分