Konica Minolta bizhub 200 - Manual (Page 79)

3 User Operations
3-12 200/250/350
Use
r Op
er
at
ions
Chapter 3
% If the Enhance Security function is set to [ON], entry of a wrong
password is counted as unauthorized access. If a wrong User Box
Password is entered three times, a message appears that tells that
the machine rejects any access to the User Box for any subsequent
authentication attempt. The machine is then set into an access lock
state. To cancel the access lock state, the Administrator of the ma-
chine must perform the Unlock operation. Contact the Administra-
tor of the machine.
10
Select the target User
Box document.
– To delete all User
Box documents con-
tained in the User
Box selected, touch
[Delete All].
? What happens when
Delete All is execut-
ed?
% If [Delete All] is exe-
cuted, the data is deleted by overwriting with 0x00 → 0x00 → 0x00
through the Temporary Data Overwriting function.
11
Touch [Action].
12
Select the desired function.
– To print the User Box document, touch [Print].
– To change the User Box document name, touch [Change Name].
– To deliver the User Box document over a network, touch [Route].
– To delete the User Box document, touch [Delete].
2
Reminder
If the destination is to be specified using the corresponding one-touch
key for executing [Route] from the control panel, always check that the
destination is correct to make sure that the data is sent to the correct
destination.
If the destination is to be specified through direct input for executing
[Route] from the control panel, always check that the destination is cor-
rect to make sure that the data is sent to the correct destination.
If the User Box document is deleted, it is deleted by overwriting with 0x00
→ 0x00 → 0x00 through the Temporary Data Overwriting function.
350_security_E.book 12 ページ ２００６年１１月２０日 月曜日 午前１０時４１分