Konica Minolta bizhub 200 - Manual (Page 27)

2 Administrator Operations
2-10 200/250/350
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2
Reminder
When Password Rules is set to [ON], the characters and the number of
digits used for each password are restricted. For details of Password
Rules, see “Password Rules” on page 1-11.
2.2.1 Setting the Enhance Security function
2
Note
When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. Be sure to allow an interval of 10
sec. or more in order to ensure correct operations.
Here is the sequence, through which the main power switch and sub
power switch are turned on and off:
Turn off the sub power switch
→ Turn off the main power switch → Turn
on the main power switch → Turn on the sub power switch
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
<Setting can be made only from the control panel>
0 For the procedure to call the Admin. Management mode to the display,
see “Accessing the Admin. Management mode” on page 2-2.
1
Call the Admin. Management mode to the screen from the control pan-
el.
2
Touch [Admin. 2].
350_security_E.book 10 ページ ２００６年１１月２０日 月曜日 午前１０時４１分