Konica Minolta bizhub 200 - Manual (Page 7)

1 Security
1-2 200/250/350
Security
Chapter 1
1 Security
1.1 Introduction
Thank you for purchasing our product.
This User’s Guide contains the operating procedures and precautions to be
used when using the security functions offered by the bizhub 200, 250, or
350 machine. To ensure the best possible performance and effective use of
the machine, read this manual thoroughly before using the security func-
tions. The Administrator of the machine should keep this manual for ready
reference. The manual should be of great help in finding solutions to operat-
ing problems and questions.
This User’s Guide (Ver. 1.02) describes bizhub 350/bizhub 250/bizhub 200/
ineo 350/ineo 250 (Ver. 2) Multi Function Peripheral Control Software (MFP:
4040-0100-G20-52-000).
Compliance with the ISO15408 Standard
When the Enhance Security function on this machine is set to [ON], more en-
hanced security functions are available.
The security functions offered by the bizhub 200, 250, or 350 machine com-
ply with ISO/IEC15408 (level: EAL3).
Operating Precautions
This machine issues an alarm message or sounds an alarm beep when it is
erroneously operated or wrong data is entered. (The alarm beep is not, how-
ever, sounded if Confirmation Beep of User Management is set to [0].) If the
alarm message appears or the alarm beep sounds, follow the instructions
given by the message and operate the machine correctly or input correct
data as necessary.
The Administrator of the machine should make sure that each individual gen-
eral user exits from the current mode to return to the basic screen whenever
the access to that mode is completed or if the user leaves the machine with
the mode screen left displayed.
The Administrator of the machine should exit from the current mode to return
to the basic screen whenever the access to that mode is completed or if he
or she leaves the machine with the mode screen left displayed.
350_security_E.book 2 ページ ２００６年１１月２０日 月曜日 午前１０時４１分