Konica Minolta bizhub PRO 1050P - Manual (Page 25)

Machine Configuration (continued)
21
External View
Internal View
No. Name Description
1 Secondary (Sub) tray of
Saddle stitcher Holds non-sorted sets output from Saddle stitcher.
2 Multi tri-folding mode
outlet cover handle Opens upward to remove mishandled paper.
3 Multi tri-folding mode tray Holds sets output in multi tri-folding mode.
4 Secondary (Sub) tray Holds non-sorted sets output from the machine on the
right side of the Saddle stitcher.
5 Right side door of Saddle
stitcher Opens to remove mishandled paper.
6 Saddle stitcher tray Withdrawn when using Fold & Staple and multi half
folding mode.
7 Waste basket Withdrawn to remove waste paper.
8 Left side door of Saddle
stitcher Opens for staple supply or to remove mishandled
paper.
No. Name Description
1 Upper cover lever of
Folding unit Opens the upper cover to remove paper misfed inside
the Folding unit.
2 Secondary (Sub) tray
conveyance lever
(middle) Opens downward to remove mishandled paper.
3 Folding unit drawer
handle Opens the drawer to remove paper misfed inside the
Folding unit.
4 Secondary (Sub) tray
conveyance lever (right) Opens upward to remove mishandled paper.
5 Inlet lever Opens leftward to remove mishandled paper.
6 Feeding knob Can be turned clockwise to feed mishandled paper to
the Folding unit.
7 Folding unit conveyance
lever Opens rightward to remove mishandled paper.
8 Folding unit conveyance
cover handle Opens the cover to remove mishandled paper.
9 Folding unit front cover
lever Opens upward to remove mishandled paper.
10 Stapling unit Staples folded sets.
11 Stapling unit knob Can be turned clockwise to feed mishandled paper.
12 Outlet lever Opens leftward to remove mishandled paper.
13 Outlet conveyance lever Opens downward to remove mishandled paper.