Konica Minolta bizhub PRO 1050P - Manual (Page 41)

37
Using Folder/Finisher Functions Manually
The following finishing functions are manually available with a set of paper loaded in
the upper tray of the post inserter of Folding Unit FD-503.
Folding Unit FD-503 only:
Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold, Half Fold, 2 Holes Punch,
3 Holes Punch
Folding Unit FD-503 + Finisher FS-503:
1 Stapling/ 2 Stapling in addition to the functions for folding unit only
Folding Unit FD-503 + Saddle Stitcher SD-506:
Fold & Staple in addition to the functions for folding unit only
Folding Unit FD-503 + Finisher FS-503 + Saddle Stitcher SD-506:
All functions are available.
Specifications for Using Folder/Finisher Functions Manually
❒ When using folder/finisher/saddle stitcher functions manually, paper should be
placed only in the upper tray of the post inserter.
❒ Multi-feed detection is a feature that automatically stops the machine if more
than one sheet is fed at a time. The post inserter is designed to detect multi-
feeding.
Coated paper and other kinds of smooth surface paper may activate this
function even if a single sheet is fed, stopping the machine. Should this case
occur frequently, press the Multi-Feed Detection button and light up the lower
lamp, in order to turn the function OFF.
Letter Fold-in Z-Fold 1 Stapling 2 Holes Punch Folding
Letter
Fold-out
Double
Parallel
Gate 2 Stapling
Fold & Staple
3 Holes Punch
Multi-Feed Detection
Function ON
Multi-Feed Detection
Function OFF
Start/Stop button Punch selection
button Fold Selection button
Staple Selection button
Multi-Feed Detection button