Konica Minolta bizhub PRO 1050P - Manual (Page 62)

Using Perfect Binder PB-502 (continued)
58
5.
Specify the cover print setting.
This setting is available when one of the tray 1 to 5 is specified as the cover
tray source.
Select
On to print on covers, or Off to attach blank covers.
Also select
Simplex to print only on the front side, or Duplex to have both
front and back sides printed.
For details of finished result with each setting specified, see p. 47 to p. 48. The
original image to be printed on cover varies depending on whether the original
count is odd or even.
6.
Specify the spine width.
Touch
Spine Width (1-30 mm) to display the Spine Width Screen.
Use the screen keypad, arrow keys
▲ and ▼, or the control panel keypad to
enter the desired value, then touch
OK.