Konica Minolta bizhub PRO 1050P - Manual (Page 31)

Removing Finished Sets from Large Capacity Stacker LS-505
27
The carriage is for the exclusive use of carrying paper. Do not drive it in any
other use.
Never put yourself in the large capacity stacker.
Once lowering the stacker unit for the purpose of removing mishandled paper
or checking output sheets, be sure to remove all the sheets from the carriage.
If the carriage is returned with any sheets left on the stacker unit, machine
trouble may be caused.
When returning the stacker unit to its original position, fit the two projections of
the carriage to the two holes of the stacker unit, otherwise the carriage cannot
be returned properly.
To secure paper on the carriage
1.
Remove the paper stopper form the carriage.
2.
Mount the paper stopper on the paper holder.
Pull the two projections of paper stopper to the holder, then raise the other
side as illustrated.