Konica Minolta bizhub PRO 1050P - Manual (Page 42)

Using Folder/Finisher Functions Manually (continued)
38
1.
Place paper in the upper tray of the post inserter.
1 or 2 stapling: Place paper face up.
Punching: Place paper face up.
Folding: Place the surface to be inside the fold face up.
Fold&Staple: Place the surface to be inside the fold face up.
Align the guide plate with the paper.
2.
Select a mode.
When selecting 1 or 2 stapling / fold&staple, press the Staple selection
button to turn on the desired mode lamp.
When selecting 2- or 3-hole punching, press the Punch selection button to
turn on the desired mode lamp.
When selecting folding (from 6 styles), press the Fold selection button to
turn on the desired mode lamp.
Punching and stapling can be combined. When combining them, turn on the
lamps for both functions.
Upper tray
Punch selection button
Fold Selection button Staple Selection button