Konica Minolta bizhub PRO 1050P - Manual (Page 55)

Using Perfect Binder PB-502 (continued)
51
Making Perfect-Bound Book (1050/1050e only)
1.
Load paper for body sets and covers in each tray to be used.
Load paper for body sets in one of the tray 1 to 5.
When printing on covers, also load cover sheets in one of the tray 1 to 5.
If cover print is not required, load cover sheets in one of the tray 1 to 5,
cover feeding tray of Perfect binder, and upper/lower tray of post inserter on
Folding unit.
While the Perfect binder is warming up, the Machine Status Screen will
prompt you the current warmup status of the machine.
• Custom paper size is to be used as cover. Be sure to check the precise
dimensions in order to specify them during this procedure.
• If Cover Trimming is desired, be sure to use the size that secures 3 mm to
40 mm of trimming width.
• When using the Post Inserter, touch [
For P.B. Cover] on the Machine
Status Screen to highlight it.