Konica Minolta bizhub 25e - Manual (Page 25)

1-12 Using My Jobs
10
Select [Yes] to include the start key operation in the job or [No] not to include
the start key operation, and press [Enter].
No: The registered job will displayed when you execute the job. You can confirm the
functions and then press <Start>.
Yes: The registered job will be done when you execute the job.
11
Press [Close].
NOTE
Also, you can register or edit My Job by following procedure.
Press [Setting] on My MFP Menu screen  [Register]  [My Jobs].
The remaining procedure is the same as steps 3 to 11 in “Registering / Editing My
Jobs” (page 1-10) .