Konica Minolta bizhub 25e - Manual (Page 65)

2-18 Specifying the network settings
Function Description Settings
e-mail Gateway You can transmit documents to an e-mail gateway (fax
server).
For details, see
“Setting an e-mail gateway” (page 2-32) .
 Setting
You can specify the default setting.
 Prefix
Enter the prefix for the local part of the e-mail address.
Up to 32 characters can be entered.
 Suffix
Enter the suffix for the local part of the e-mail address.
Up to 48 characters can be entered.
 File Format
You can select the file format.
 Encode
You can specify the image encoding method.
OFF
ON
Not registered
Not registered
TIFF
PDF
MH
MR
MMR
JBIG
Authentication
Method You can set the authentication method for users that log
in.
For details, see
“Setting user authentication” (page
2-31) .
Stand-Alone
Single Sign On
Delete
Restriction
Settings You can initialize the access restrictions set in Message
Board from the machine.
Use this function when you cannot access Message
Board.
Scan to Print
Clear You can delete the printers registered in the Scan to
Print Monitor from the machine.
Use this function when the computer using the Scan to
Print Monitor cannot access the machine.
Initialize
Service Setting You can initialize the service settings specified in the
machine policy settings of Message Board from the
machine.
Use this function when you cannot access Message
Board.
Network
Connection You can set the communication speed for the LAN that
is connected. Auto
100Mbps - Full Duplex
100Mbps - Half Duplex
10 Mbps - Full Duplex
10 Mbps - Half Duplex
NOTE
Underlined values are the default settings specified at the time of shipment.