Konica Minolta bizhub 25e - Manual (Page 53)

2-6 Setting security codes
5
Enter the password again, and press [Enter].
„ Editing / deleting the administrator password
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
3
Enter the administrator password, and press [Enter].
4
Press [Admin Password].
5
Enter the new password, and press [Enter].
• Up to 28 characters can be entered.
• To delete the password, press [Enter] without entering a new password.
6
Enter the new password again, and press [Enter].