Konica Minolta bizhub 25e - Manual (Page 71)

2-24 Specifying the network settings
Item Description
Attribute Setting
Name 1 Set the name attribute. Up to 49 characters can be entered,
and the default value is “cn”.
Name 2 Set the name attribute. Up to 49 characters can be entered,
and the default value is “commonname”.
e-mail Address 1 Set the e-mail address attribute. Up to 49 characters can be
entered, and the default value is “mail”.
e-mail Address 2 Set the e-mail address attribute. Up to 49 characters can be
entered.
Fax Number 1 Set the fax number attribute. Up to 49 characters can be
entered, and the default value is “facsimileTelephoneNumber”.
Fax Number 2 Set the fax number attribute. Up to 49 characters can be
entered.
Telephone Number 1 Set the phone number attribute. Up to 49 characters can be
entered, and the default value is “telephoneNumber”.
Telephone Number 2 Set the phone number attribute. Up to 49 characters can be
entered.
Company Name 1 Set the company name attribute. Up to 49 characters can be
entered, and the default value is “company”.
Company Name 2 Set the company name attribute. Up to 49 characters can be
entered, and the default value is “o”.
„ Setting the primary LDAP server
You can set the LDAP server to use for LDAP searching from the registered LDAP
servers.
Make sure to register at least one LDAP server in advance.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Network Settings].
4
Press [LDAP Server Setting].
5
Press [Default Server].