Konica Minolta bizhub 25e - Manual (Page 51)

2-4 Machine management settings
Function Description Settings Reference page
Initialize all
data You can erase the data set in the
[Setting] mode, such as the address
book and copy/fax function settings,
and the data saved in the machine,
such as the stored documents.
When this operation is done, the
machine reboots from itself.
Data that has been cleared cannot
be restored.
PIN Mode The entered PIN (personal
identification number) will not
appear in the journal, error message
printout, delayed command list or
transmission report. OFF
Mode1
Mode2 Chapter 4, “PIN
masking” in
“Security fax
functions” in the
Scanner and Fax
Guide.
Admin
Password You can set the administrator
password.
You can set an administrator
password to prevent users other
than the administrator from editing
the settings in the [Management]
screen. No administrator
password is set at
shipment. 2-5
Protect
Passcode You can set the protect passcode.
A protect passcode is required when
using function protect settings. No protect passcode is
set at shipment. 2-7
Automatic
LogoutTime You can set the time how long it
takes to automatically log out a
user when the machine is left idle. 1-10 minutes:
3 minutes 2-39
NOTE
Underlined values are the default settings specified at the time of shipment.