Konica Minolta bizhub 25e - Manual (Page 118)

1
2
3
4
5
Specifications
Specifications 5-11
Acceptable documents
„ Acceptable documents
Automatic document feeder (ADF)
Single-sheet Multiple-sheet
Size
(Width ×
Length)
Simplex scan
Max. : 8.5 × 35.4 in. (216 × 900 mm)
8.5 × 15.7 in. (216 × 400 mm) at 600 dpi
Min. : 4.7 × 3.9 in. (120 × 100 mm)
Duplex scan
Max. : 8.5 × 14.0 in. (216 × 356 mm)
Min. : 4.7 × 5.5 in. (120 × 139.5 mm)
Simplex scan / Duplex scan
Max. : 8.5 × 14.0 in. (216 × 356 mm)
Min. : 8.5 × 5.5 in. (216 × 139.5 mm)
or 8.3 × 5.8 in. (210 × 148.5 mm)
Quantity
1 sheet Max. 80 sheets of Letter, Legal,
Half-letter , A4, A5 ,
F4 (weight: 20 lbs.)
Weight 35.0 to 128.0 g/m 2 52.0 to 105.0 g/m 2
Thickness 0.002 to 0.006 in. (0.05 to 0.15 mm) 0.002 to 0.005 in. (0.07 to 0.12 mm)
Document type Plain paper Plain paper
Document glass
Size
(Width ×
Length)
Max. : 8.5 × 14.0 in. (Legal) (216 × 356 mm)
Min. : Unlimited
Quantity 1 sheet
Thickness When using the platen cover: Max 1.3 in. (32 mm)
„ Items to avoid
The following documents cannot be loaded into the automatic
document feeder (ADF). Use the document glass for these types of
documents.
• Torn documents or those with holes
• Extremely wrinkled or curled documents
• Documents which are moistened, or stuck with static electricity
• Documents with carbon on the back or no-carbon documents
• Cloth, metal sheets
• Documents with staples, paper clips, or adhesive tape attached
• Documents pasted or glued together
• Glossy documents or documents with a special coating
If you load the following types of documents on the document glass,
the glass surface could be damaged or cracked.
• Do not strongly press down a document when copying a thick document.
• When a solid object is being scanned, load it carefully on the document glass.
• Sharp protrusions could scratch the glass surface.