Konica Minolta bizhub 25e - Manual (Page 27)

1-14 Using My Jobs
Printing My Jobs list
1
Press [My Jobs] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Add/Edit].
3
Press [List].
4
Press [Yes].
Press [ON] to enable duplex printing, or [OFF] to disable it.
NOTE
Also, you can print My Job list by following procedure.
Press [Setting] on My MFP Menu screen  [List]  [My Jobs List]  [Yes].
Executing My Jobs
1
Press [My Jobs] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press the job you want to execute.
NOTE
If the registered function is protected, a message indicating so is displayed when My
Jobs is executed. For details, see “Setting mode protection” (page 2-13) .