Konica Minolta bizhub 25e - Manual (Page 54)

1
2
Management
Setting security codes 2-7
Setting the protect passcode
You can set a four digit number of your choice for the protect passcode. Make sure to note
and store the number after setting it.
„ Setting the protect passcode
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Protect Passcode].
5
Enter the protect passcode using the numeric keys, and press [Enter].
Enter a four digit number.