Konica Minolta bizhub 25e - Manual (Page 61)

2-14 Managing user access
Managing user access
If you use this function, you can check the total number of pages used for the fax, copy,
scan, and print modes and the total communication time for all user.
Printing the user access management list
The following information is included on the user access management list.
• The total communication time for all users
• The total number of pages of faxing, copying, scanning and printing for all users
NOTE
• A maximum of 999,999 pages and a maximum time of 999:59:59 (999 hours, 59
minutes, 59 seconds) can be counted.
• For details on resetting the counters, see “Resetting the counter” (page 2-15) .
• If you want to print the device usage status for a specific user only, print the list
from Message Board. For details, see chapter 4, “User access management” in the
Message Board Guide.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [List].
3
Press [User Access].
4
Press [Yes].
Press [ON] to enable duplex printing, or [OFF] to disable it.