Konica Minolta bizhub 25e - Manual (Page 94)

1
2
3
Maintenance
Cleaning 3-7
Cleaning the touch panel
When the touch panel is dirty, it may become difficult to operate the machine.
Clean the panel at regular intervals.
1
Confirm the machine is in the energy save mode.
• While the machine is in the energy save mode, the touch panel display is turned off and only
the energy save key illuminates green.
• To turn the energy saving mode on or off, press <Energy Save>.
2
Wipe the touch panel with a soft cloth.
When the area is extremely dirty, wipe it with a cloth dipped in a small quantity of a mild
cleaning solution, and then wipe it again with a cloth dipped in water and thoroughly wrung
out.
Touch panel display
<Energy Save> key