Konica Minolta bizhub PRESS C7000 - Manual (Page 141)

Parameter Option Description
Spot color Spot color Provides the following options:
● Spot Dictionary—Applies the CMYK values that are
defined in the spot color dictionaries. You can edit these
values using the Spot Color Editor tool. The spot color
dictionaries supported are: HKS, DIC Color Guide,
Pantone, Pantone GOE, Pantone Plus, and TOYO.
Refer to the Spot Color Editor window for the complete
list.
● Original file values—Uses the CMYK values from your
file.
● Destination Profile—Uses the destination profile that is
selected under Color > Color Flow, and applies it to the
spot CMYK values.
Use legacy spot library—Uses the legacy Pantone color
dictionary to print a file that includes a spot color
Protected Colors CMYK
Note: If you protect RGB, gray, or CMYK colors, all colors
in the job that include the same color combination as the
protected color, will also be protected.
Provides the following options:
● Preserve pure CMY colors—Preserves pure cyan,
magenta, and yellow during transformation.
● Preserve black color—Preserves pure black during
transformation.
● Use protected CMYK values—Retains CMYK colors
as defined in the Spot Color Editor.
RGB Use protected RGB values—Retains RGB colors as
defined in the Spot Color Editor .
Device Gray Use protected gray values—Retains gray colors as
defined in the Spot Color Editor .
Calibration Linked Uses the calibration table that was created for the media
type and screening method selected for your job
Calibration Latest The last calibration table that was created is applied to your
job.
Normal This table is used if a calibration table has not been created
for the media type, weight, and screening method that you
are using. You cannot edit this calibration table.
None Does not apply a calibration table when jobs are processed
and printed.
Color tab in the job parameters window 131