Konica Minolta bizhub PRESS C7000 - Manual (Page 68)

Calibration table Info Graph tab
During printing, the IC-307 print controller automatically replaces
the CMYK values in the RTP file with new values that compensate
for the printer’s current performance level.
This tab includes the following:
Separations
The graph displays cyan, magenta, yellow, and black
separations. You can see information about each
separation by clicking the desired separation button. Or you
can view all the separations together, by clicking the button
that shows all four colors.
Output Density
The vertical axis represents the dot percentage values of
the final output data (after applying the calibration table)
that is sent to the printer.
Input
The horizontal axis represents the dot percentage values of
the RTP file.
Adding an entry to a calibration table
You can review a calibration table to make sure that the curves
are relatively smooth and continuous. If you are not satisfied with
58 Chapter 7—Managing color