Konica Minolta bizhub PRESS C7000 - Manual (Page 21)

Setting up printing on a Windows computer
Adding a network printer to Windows Server 2008/2003/XP
To print from a Windows computer, you first need to add a IC-307
print controller virtual printer to your client workstation.
Tip: Following are some shortcut tips for setting up a printer. The full
procedure is detailed below.
● Locate the IC-307 print controller in My Network Places, and then
double-click on the network printer you want to install. The network printer
is automatically installed on your computer and appears in the list of
printers.
● If you know the name of your IC-307 print controller, click Start > Run,
and then type \\server name. The IC-307 print controller opens
showing a list of all the network printers. Double-click on the network
printer you want to install.
1. From the Start menu, select Settings > Printers and Faxes.
The Printers and Faxes window appears.
2. In the Printer Tasks area, select Add a printer.
Note: Your computer might have slightly different wording from what
appears in this task.
The Add Printer Wizard appears.
3. Select Next.
4. Select A network printer, or a printer attached to another
computer, and then click Next.
5. Select Browse for a printer, and click Next.
6. Find the IC-307 print controller, and double-click it to display
the list of network printers.
7. Select the desired printer, and click Next.
8. When a message appears, click Yes.
9. Select one of the following:
○ Yes if you want to set this printer as the default printer on
your computer.
○ No if you don't want to set the printer as the default printer
on your computer.
10. Click Next.
11. Click Finish to close the wizard.
The IC-307 print controller network printer is added to your printer
list. In addition, the Print Driver software and PPD file are
automatically copied.
Setting up printing on a Windows computer 11